Fire-Dex Leather Fire Boot

Fire-Dex FDXL100 Leather Boot Brochure

Leather Boot Model: FDXL100

Leather:

·        2.2 mm full grain silicone tanned waterproof and flame retardant leather.

Vapor Barrier:

·        Crosstech Omaha military boot package with nylon inner liner. Waterproof, breathable and antiviral membrane is laminated to a polyester tricot and a nylon inner liner that wicks moisture away from the foot.

Stroble Bootie Construction:

·        Waterproof Crosstech bootie designed with a flat sole bottom made from a W.L Gore gasket material. The seams are sewn and stitched around the outside circumference of the foot. The gasket material is cemented to the bottom of the boot to prevent liner pull out. All seams are taped with W.L Gore seam tape. 

Shaft Thermal Barrier:

·        580g of Poly Felt insulates against heat and cold and provides cushion and comfort in the boot.  This thermal liner is positioned between the Crosstech inner liner and the leather outer shell.

Foot Cavity Thermal Barrier:

·        200g Kevlar^®/Nomex^® blend for added cut resistance and thermal protection. This thermal liner is positioned between the Crosstech inner liner and the leather outer shell.

Protective Toe:

·        #88 composite toe complies with NFPA, CSA, ANSI. Composite toes are lighter than steel and do not conduct heat or cold as well as steel keeping the foot warmer when it’s cold and cooler when it’s hot.

Puncture Resistant Barrier:

·        Lenzi composite puncture resistant fabric complies with CSA and NFPA. This flexible fabric allows greater movement and dexterity in the foot especially when in use in a leather fire boot with a cement sole. 

Shank:

·        5 inch long, ¾ wide, triple ridge steel shank.  Provides comfort and stability to firefighters when standing on ladder shanks.

Internal Heel Counter:

·        Poly material heat formed and cold molded to maintain longevity of the heel cup. This process molds the heel counter to each individual boot creating a better fit and increasing the longevity of the boot.

External Heel Counter:

·        3D molded flame retardant abrasion resistant rubber. By compression molding this heel piece the same abrasion levels of the outsole can be achieved.

3D Toe Cover:

·        3D compression molded toe guard is placed over the leather and the composite protective toe. This toe guard will increase the longevity of the boot while offering the firefighter great traction and slip resistance when in positions where the toe comes into contact with the ground.

Pull On Holes:

·        Pull on holes are reinforced with a double layer of leather sewn together with Kevlar thread for increased longevity.  The holes are of ample size enabling firefighters to use efficiently when wearing fire gloves.

Thread:

·        All threads are made of Kevlar, Nomex or a combination of the two materials.

Cement Cup Sole:

·        This sole is compression molded with Vibram’s exclusive “Fire & Ice” rubber compound. The combination of rubber compound, sole design, and production method provides the end user with the most durable, slip resistant, flame retardant and comfortable and functional sole in the industry.

Fire & Ice Rubber Compound by Vibram:

·        The Fire & Ice compound by Vibram was developed to maximize abrasion and slip resistance in the most extreme conditions.  The sole is flame retardant and flexible in both hot and cold temperatures. The combination of the sole design, construction method, and compound maximizes slip resistance in extreme cold conditions.

Heat Shield at Vamp:

·        The heat shield is an extra layer of foam placed at the vamp to reduce the discomfort caused by radiant heat that naturally hits the boot in the vamp area of the boot.

3 Density Sock Liner:

·        This three density liner starts off with a nano-printed pattern on the cover of the sock liner. 

·        This nano-printed pattern increases circulation in the foot and legs during prolonged use. The cover of the sock liner has both anti-microbial and moisture wicking capabilities keeping the foot healthy and ready for action. 

·        Under the sock liner there is a layer of EVA memory foam. Over time this memory foam will make an impression of the user’s foot creating the cradling effect.

·        Under the EVA memory foam is a base of polyurethane, which acts as a shock absorber.

·        At the ball of the foot and the heel of the foot there are two gel drops.  These gel drops are placed at the high impact points of the foot.  The gel drops are designed to absorb and disperse the energy created by a heel strike or push off from the ball of the foot.

·        The combination of all these features are intended to reduce foot, leg and back fatigue allowing a firefighter to operate at peak performance for longer periods of time.

·        The sock liner is custom cut to fit perfectly inside each boot. 

·        The sock liner is removable for drying or replacement.